Loading...
|
Please use this identifier to cite or link to this item:
https://nccur.lib.nccu.edu.tw/handle/140.119/54173
|
| Title: | 最小成本下，規格及X-bar-S管制圖之設計
The design of specification and X-bar-S charts with minimal cost |
| Authors: | 沈依潔
Shen, I Chieh |
| Contributors: | 楊素芬
沈依潔
Shen, I Chieh |
| Keywords: | 經濟統計管制圖
顧客允差
生產者允差
X-bar-S管制圖
損失函數
Economic statistical control charts
Consumer tolerance
Producer tolerance
X-bar and S charts
Loss function |
| Date: | 2011 |
| Issue Date: | 2012-10-30 10:13:37 (UTC+8) |
| Abstract: | 最小成本下，規格及X-bar-S管制圖之設計
The design of economic statistical control charts and specification are both crucial research areas in industry. Furthermore, the determination of consumer and producer specifications is important to producer. In this study, we consider eight cost models including the consumer loss function and/or the producer loss function with the economic statistical X-bar and S charts or Shewhart-type economic X-bar and S charts. To determine the design parameters of the X-bar and S charts and consumer tolerance and/or producer tolerance, we using the Genetic Algorithm to minimizing expected cost per unit time. In the comparison of examples and sensitivity analyses, we found that the optimal design parameters of the Shewhart-type economic X-bar and S charts are similar to those of economic statistical X-bar and S control charts, and the expected cost per unit time may lower than the actual cost per unit time when the cost model only considering consumer loss or producer loss. When considering both consumer and producer tolerances in the cost model, the design parameters of the economic X-bar and S charts are not sensitive to the cost models. If the producer tolerance is smaller than the consumer tolerance, and the producer loss is smaller than the consumer loss, the optimal producer tolerance should be small. |
| Reference: | [1] Ardia, D., Mullen, K., Peterson, BG. and Ulrich, J. (2011), DEoptim, Differential Evolution Optimization in R. URL http://CRAN.R-project.org/package=DEoptim.
[2] Collani, V. and Sheil, J. (1989), “An approach to controlling process variability”, Journal of Quality Technology, Vol. 24, pp. 87-96.
[3] Duncan, A. (1956), “The economic design of chart used to maintain current control of a process”, Journal of The American Statistical Association, Vol. 51, pp.228-242.
[4] Duncan, A. (1974), Quality Control and Industrial Statistics, Richard D. Irwin, Homewood, IL.
[5] Elsayed, E. and Chen, A. (1994), “An economic design of control charts using quadratic loss function”, International Journal of Production Research, Vol. 32, pp. 873-887.
[6] Fathi, Y. (1990),“Producer-consumer tolerances”, Journal of Quality Technology, Vol. 22, No. 2, pp. 138-145.
[7] Feng, Q. and Kapur, K. (2006), “Economic development of specifications for 100% inspection based on asymmetric quality loss function”, Quality Technology & Quantitative Management, Vol. 3, No. 2, pp. 127-144.
[8] Kapur, K. (1988), “An approach for development of specifications for quality improvement”, Quality Engineering, Vol. 1, No.1, pp. 63-77.
[9] Lee, M., Kim, S., Kwon, H., and Hong, S. (2004), “Economic selection of mean value for a filling process under quadratic quality loss”, International Journal of Reliability, Quality and Safety Engineering, Vol. 11, No. 1, pp. 81-90.
[10] Maghsoodloo S. and Li M. (2000), “Optimal asymmetric tolerance design”, IIE Transactions, Vol. 32, No. 12, pp. 1127-1137.
[11] Montgomery, D. (1980), “The economic design of control charts: a review and literature survey”, Journal of Quality Technology, Vol. 21, pp. 65-70.
[12] Montgomery, D. (1985), ”Economic design of control charts for two manufacturing process models”, Naval Research Logistics Quarterly, Vol. 32, pp.531-646.
[13] Rahim, R., Lashkari, R. and Banerjee, P. (1988), “Joint economic design of mean and variance control charts”, Engineer Optimization, Vol. 14, pp.65-78.
[14] Saniga, E. (1979), “Statistical control chart design with an application to and R control charts”, Management Science, Vol. 31, pp.313-320.
[15] Tang, K. (1988), “Economic design of product specifications for a complete inspection plan”, International Journal of Production Research, Vol. 26, No. 2, pp. 203-217.
[16] Woodall, W. (1986), “Weaknesses of the economic design of control charts”, Technometrics, Vol. 28, pp. 408-409.
[17] Woodall, W. (1987), “Conflicts between Deming’s philosophy and the economic design of control charts”, Frontiers in Statistical Quality Control, Vol. 3, pp. 242-248.
[18] Yang, S. (1997), “An optimal design of joint and S control charts using quadratic loss function”, International Journal of Quality & Reliability Management, Vol. 14, No. 9, pp.948-966. |
| Description: | 碩士
國立政治大學
統計研究所
99354026
100 |
| Source URI: | http://thesis.lib.nccu.edu.tw/record/#G0099354026 |
| Data Type: | thesis |
| Appears in Collections: | [統計學系] 學位論文
|
Files in This Item:
| File |
Size | Format | |
|---|
| 402601.pdf | 2725Kb | Adobe PDF2 | 231 | View/Open |
|
All items in 政大典藏 are protected by copyright, with all rights reserved.
|
