政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/131343
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文筆數/總筆數 : 113318/144297 (79%)
造訪人次 : 51033613      線上人數 : 917
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/131343


    題名: 企業應用品質成本分析與品質改善策略於繼電器製程之實證研究－以S公司為例
    An Empirical Research on the Application of Quality Cost Analysis and Quality Improvement Strategies in the Relay Manufacturing Process - A Case Study of S Company
    作者: 洪方正
    Hung, Fang-Cheng
    貢獻者: 李易諭
    Lee, Yih-Yuh
    洪方正
    Hung, Fang-Cheng
    關鍵詞: 品質成本
    IPA分析
    品質改善策略
    顧客滿意
    RPN
    Cost of Quality(COQ)
    IPA analysis
    Quality improvement strategy
    Customer satisfaction
    Risk priority number
    日期: 2020
    上傳時間: 2020-08-03 18:41:27 (UTC+8)
    摘要: 在競爭激烈的繼電器產業中，高良率的產品品質已經成為企業生存之必須，但不良品的存在仍然不能被避免。為盡力消除不良品，各項改善品質的方法，如：魚骨圖、Why-Why分析法、8D解決問題法等已被繼電器業界廣泛使用，但由於企業資源有限，無法給予每一項失效模式(failure mode)完整的解決方案。另外，根據顧客抱怨處理失效模式的企業流程，未必能與顧客滿意度及企業績效連結。
    本研究於企業端導入「結合IPA分析之品質改善模式」，利用IPA分析洞察顧客之聲(voice of customer)，為企業篩選出改善後最能增加顧客滿意度的品質屬性，實行以顧客為中心的品質改善策略，同時藉由品質成本的分析，說明此模式降低品質成本機制及項目。
    本文有以下結論：
    1.S公司內部員工對於產品品質的認知與外部顧客對於產品品質的認知存在差距
    2.「結合IPA分析之品質改善模式」能夠增進顧客滿意度，並有效降低品質成本(cost of quality)
    In the highly competitive relay industry, high-yield product quality has become a necessity for the survival of enterprises. However, the existence of defective products can not be avoided. In order to eliminate defective products as much as possible, various methods of improving quality, such as “fishbone Diagram”, “Why-Why analysis”, “Eight disciplines problem solving”, etc., have been widely used in the relay industry. Nevertheless, due to limited enterprise resources, each failure mode cannot be given a complete solution. Moreover, the business process of handling failure modes based on customer complaints may not be linked to customer satisfaction and business performance of enterprises.
    This study introduces the "quality improvement model with IPA analysis" into the process of S company, using IPA analysis to gain insights from voice of customers, to select the quality factors that can increase customer satisfaction after improvement, which also implements customer-centered quality improvement strategies. In addition, through the analysis of cost of quality(COQ), this study illustrates the mechanisms how this new model reduces cost of quality(COQ).
    This study has the following conclusions:
    1. There is a gap between the perception of product quality by S internal employees and the perception of product quality by external customers.
    2. "Quality improvement model combined with IPA analysis" can increase customer satisfaction and effectively reduce cost of quality(COQ).
    參考文獻: Abalo, J., Varela, J., & Manzano, V. (2007). Importance values for Importance–Performance Analysis: A formula for spreading out values derived from preference rankings. Journal of Business Research, 60(2), 115-121.
    Bose, T. K. (2012). Application of fishbone analysis for evaluating supply chain and business process-a case study on the St James Hospital. International Journal of Managing Value and Supply Chains (IJMVSC), 3(2), 17-24.
    Bottorff, D. L. (1997). COQ systems: the right stuff. Quality progress, 30(3), 33.
    Čater, T., & Čater, B. (2010). Product and relationship quality influence on customer commitment and loyalty in B2B manufacturing relationships. Industrial Marketing Management, 39(8), 1321-1333. doi:10.1016/j.indmarman.2010.02.006
    Chu, C.-H., & Guo, Y.-J. (2015). Developing similarity based IPA under intuitionistic fuzzy sets to assess leisure bikeways. Tourism Management, 47, 47-57.
    Crosby, P. B. (1979). Quality is free: The art of making quality certain (Vol. 94). New York: McGraw-Hill.
    Duggett, A. (2004). A statistical comparison of three root cause tools. Journal of Industrial Technology, 20(2), 1-9.
    Gryna, F. M. (1999). Quality and cost. In J. M. Juran & A. B. Godfrey (Eds.), Juran’s Quality Handbook, 5th ed. New York: McGraw-Hill.
    Hawes, J. M., & Rao, C. (1985). Using importance--performance analysis to develop health care marketing strategies. Journal of Health Care Marketing, 5(4).
    Ilie, G., & Ciocoiu, C. N. (2010). Application of fishbone diagram to determine the risk of an event with multiple causes. Management Research and Practice, 2(1), 1-20.
    Juran, J. M., & Godfrey, A. B. (1951). Quality control handbook (1st ed. Vol. 173). New York: McGraw-Hill.
    Juran, J. M., & Godfrey, A. B. (1962). Quality control handbook (2nd ed.). New York: McGraw-Hill.
    Kuo, Y.-F., Chen, J.-Y., & Deng, W.-J. (2012). IPA–Kano model: A new tool for categorising and diagnosing service quality attributes. Total Quality Management & Business Excellence, 23(7-8), 731-748.
    Labovitz, G., Chang, Y. S., & Rosansky, V. (1993). Making quality work: A leadership guide for the results-driven manager: University of Texas Press.
    Lin, Y.-H., & Chen, L.-W. (2010). Fuzzy approach of linguistic variable and synthetic decision for IPA on the multi-facet evaluation. International Journal of Kansei Information, 1(1), 59-66.
    Martilla, J. A., & James, J. C. (1977). Importance-performance analysis. Journal of Marketing, 41(1), 77-79.
    Matzler, K., Bailom, F., Hinterhuber, H. H., Renzl, B., & Pichler, J. (2004). The asymmetric relationship between attribute-level performance and overall customer satisfaction: a reconsideration of the importance–performance analysis. Industrial Marketing Management, 33(4), 271-277.
    Noriaki, K. (2001). Life cycle and creation of attractive quality. Paper presented at the Proceedings of the 4th QMOD Conference, Linkoping, Sweden.
    Oh, H. (2001). Revisiting importance–performance analysis. Tourism Management, 22(6), 617-627.
    Omachonu, V. K., Suthummanon, S., & Einspruch, N. G. (2004). The relationship between quality and quality cost for a manufacturing company. International Journal of Quality & Reliability Management, 21(3), 277-290. doi:10.1108/02656710410522720
    Pai, F.-Y., Yeh, T.-M., & Tang, C.-Y. (2018). Classifying restaurant service quality attributes by using Kano model and IPA approach. Total Quality Management & Business Excellence, 29(3-4), 301-328.
    Schiffauerova, A., & Thomson, V. (2006). A review of research on cost of quality models and best practices. International Journal of Quality & Reliability Management, 23(6), 647-669. doi:10.1108/02656710610672470
    Sower, V. E., Quarles, R., & Broussard, E. (2007). Cost of quality usage and its relationship to quality system maturity. International Journal of Quality & Reliability Management, 24(2), 121-140. doi:10.1108/02656710710722257
    Tontini, G., & Dagostin Picolo, J. (2013). Identifying the impact of incremental innovations on customer satisfaction using a fusion method between importance-performance analysis and Kano model. International Journal of Quality & Reliability Management, 31(1), 32-52. doi:10.1108/ijqrm-05-2012-0062
    Vahdani, B., Salimi, M., & Charkhchian, M. (2014). A new FMEA method by integrating fuzzy belief structure and TOPSIS to improve risk evaluation process. The International Journal of Advanced Manufacturing Technology, 77(1-4), 357-368. doi:10.1007/s00170-014-6466-3
    Viswanadhan, K. (2014). Analysis of economics of quality in manufacturing industries. International Journal for Quality Research, 8(1), 121-138.
    Wang, M.-T., Wang, S., Wang, S., & Wang, A. (2010). An Introduction of COQ Models and Their Applications. Paper presented at the Proceedings of the 2010 International Conference on Engineering, Project, and Production Management.
    Yin, J., Cao, X. J., Huang, X., & Cao, X. (2016). Applying the IPA–Kano model to examine environmental correlates of residential satisfaction: A case study of Xi`an. Habitat International, 53, 461-472.
    描述: 碩士
    國立政治大學
    企業管理研究所(MBA學位學程)
    107363016
    資料來源: http://thesis.lib.nccu.edu.tw/record/#G0107363016
    資料類型: thesis
    DOI: 10.6814/NCCU202000790
    顯示於類別:[企業管理研究所（MBA學位學程）] 學位論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    301601.pdf3236KbAdobe PDF2183檢視/開啟


    在政大典藏中所有的資料項目都受到原著作權保護.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋