政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/68868
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文筆數/總筆數 : 115696/146730 (79%)
造訪人次 : 55973485      線上人數 : 57
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/68868


    題名: 臺灣製造業生產力成長、技術進步與效率變動： MALMQUIST生產力指數與資料包絡分析之應用
    其他題名: Productivity Growth, Technical Progress and Efficiency Change in Taiwan`s Manufacturing Industries---An Application of Malmquist Productivity Index and Data Envelopment Analysis
    作者: 李文福
    貢獻者: 經濟學系
    關鍵詞: Malmquist生產力指數;距離函數;技術進步;技術效率;資料包絡分析
    Malmquist productivity index;Distance function;Technical progress;Technical efficiency;Data envelopment analysis
    日期: 1997
    上傳時間: 2014-08-19 09:00:51 (UTC+8)
    摘要: 本研究分析台灣製造業1978-1994年間的生產力變動。利用無母數資料包絡分析法計算Malmquist總要素生產力指數,此指數被分解為效率變動與技術變動。而技術變遷進一步被分解為產出偏向、投入偏向與量度等成分。此外,本文亦探討投入與產出偏向的判定準則。 實證結果顯示全體製造業之技術效率有所改善(年成長率為0.65%),技術亦有所提升(年成長率0.42%),因此TFP年成長率為1.07%。生產規模的變動有助於效率與生產力的提升。產業間的相對效率有相當的差異,然就長期而言,差異已顯著縮小。生產力成長或技術進步顯著的產業具有較大的資本/勞動比,而且其市場集中度亦較高。在時程上,並無產業出現一致性的技術變動偏向,但大體上技術變遷多屬資本使用型。實證結果亦顯示技術變遷與效率並不必然呈現同向變動。
    This study analyzes productivity growth in Taiwan`s manufacturing industries during 1978-1994. The nonparametric Data Envelopment Analysis approach is used to compute Malmquist productivity indexes. These are decomposed into efficiency change and technical change. The latter is further decomposed into an output bias, an input bias, and a magnitude component. In addition, the directions of technical change biases are identified. Empirical results indicate that the whole sector`s TFP increased at a rate 1.07% per annum, which could be ascribed to a technical progress (0.42%) and an efficiency improvement (0.65%). The production scale change did benefit efficiency and productivity growth. There were large differences in efficiency among industries. However, their relative efficiency was converging. The industries with higher productivity growth and/or higher technical progress did have higher capital-labor ratios, and were highly concentrated. None of the industries showed any consistent technical change bias in the course of industrial development, but most industries experienced capital-using biases most of the time. In addition, technical change and efficiency change did not necessarily move together.
    關聯: 行政院國家科學委員會
    計畫編號NSC86-2415-H004-023
    資料類型: report
    顯示於類別:[經濟學系] 國科會研究計畫

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML2875檢視/開啟


    在政大典藏中所有的資料項目都受到原著作權保護.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋