政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/122815
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文筆數/總筆數 : 113822/144841 (79%)
造訪人次 : 51788507      線上人數 : 536
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/122815


    題名: 運用精實思維改善製造流程以及人力分配 - 以運動鞋代工廠為例
    Improvement on Manufacturing Process and Workforce Allocation through Lean Thinking - A Case Study of a Footwear Factory
    作者: 鄭丞揚
    Cheng, Chen-Yang
    貢獻者: 洪叔民
    陳立民
    Horng, Shwu-Min
    Chen, Li-Ming
    鄭丞揚
    Cheng, Chen-Yang
    關鍵詞: 精實思維
    精實生產
    豐田式生產
    PDCA
    改善
    Lean thinking
    Lean manufacturing
    TPS
    PDCA
    Kaizen
    日期: 2019
    上傳時間: 2019-04-01 15:12:43 (UTC+8)
    摘要: 本研究以精實思維(Lean Thinking)為理論基礎，藉由整理出精實生產流程的五個導入步驟，以個案探討的形式，檢驗理論於實務上導入的成效。本研究對象為運動鞋製鞋業，究經由個案的觀察以及數據回饋，佐證藉由系統性的流程，生產線可以逐步的發現問題，並且藉由流程改善以及人力重新配置等，消除浪費，提升內部生產效率以及滿足客戶的需求。
    Using Lean Thinking theory as the foundation, this study sorts out the implementation process of Lean Manufacturing with five steps, examine the effectiveness of the theory by practice. This study based on a Kaizen event in a footwear factory, with inline observation and data analyses. Results indicate that via conducting Lean Manufacturing process, production can gradually reveal problems, eliminate waste through Kaizen process and workforce re-allocation, improve production efficiency and meet customer needs.
    參考文獻: 1.中文部分
    大野耐一，吳廣洋譯（2011）。追求超脫規模的經營。中衛發展中心，台北。
    王派榮（2002）。豐田生產方式運作之研究─台灣國瑞汽車公司及其協力廠之成功案例。中原大學企業管理研究所碩士論文，桃園縣。
    任恒毅、廖秀姬（2008）。精實生產價值溪流程改善方法之實證研究 - 以某汽車空調製造商為例。品質學報，VOL.15，NO.5，台北。
    今井正明，許文治譯（1997）。現場改善：日本競爭力的成功之鑰。美商麥格羅希爾出版社，台北。
    江瑞坤、大野義男、侯東旭（2007）。豐田的三位一體生產系統。中衛發展中心，台北。
    林慧敏（2016）。食品安全衛生管理上之6s e化管理系統建構：以豐田生產系統與戴明循環為應用理論。國立暨南國際大學管理學院經營管理碩士學位學程碩士在職專班碩士論文，南投縣。
    邱宏翰、李雋揚（2005）。精實生產於泵浦公司之應用。國立清華大
    學工業工程系專題報告。
    洪雅涵（2013）。改善傳統VSM導入醫療機構應用之探討。東海大學工業工程與經營資訊學系碩士論文，台中市。
    黃楹進（2004）。精實製造。工商時報，台北。
    楊義明、盤天培、曹健齡（2005）。精實生産與其它生管系統之介紹。品質月刊，41（11），51-58。
    楊凱成（2007）。足下奇蹟-台灣製鞋產業發展史。國立科學工藝博物館，台灣。 
    2.英文部分
    Agpak K. and Gokcen H.(2005). Assembly line balancing: Two resource constrained cases. International Journal of Production Economics 96, 2005, 129-140.
    Adnan, A. N., Ain Arbaai, N., & Ismail, A. (2016). Improvement of overall efficiency of production line by using line balancing. ARPN Journal of Engineering and Applied Sciences, 11(12).
    Bortolotti, T., and Romano, P. (2012). “Lean first, then automate’: a framework for process improvement in pure service companies. A case study”, Production Planning & Control: The Management of Operations, 23 (7): 513-522.
    D.R. Owens. (2006). PDCA at management level. Quality. Program. 39 (4) , p-104.
    Díaz, A., Pons, J., & Solís, L. (2012). Improving healthcare services: lean lessons from Aravind. Int. J. Business Excellence, Vol. 5, No. 4 , 413–428.
    Edwards, D. K. (1996). Practical guidelines for lean manufacturing equipment. Production and Inventory Management Journal, 37(2).
    Feld, W. M. (2000). Lean manufacturing: tools, techniques, and how to use them. CRC press.
    Fliedner, G. (2008). Sustainability: a new lean principle. In: Proceedings of the 39th Annual Meeting of the Decision Sciences Institute, Baltimore, Maryland,pp. 3321-3326.
    Fliedner, G., Majeske, K. (2010). Sustainability: the new lean frontier. Prod. Inventory Management. J. 46, 6-13
    Graban, M. (2016). Lean Hospitals: Thoughts from a Health System C.O.O. on Lean, Purpose, and Safety.
    Garza-Reyes, J.A. (2015). Lean and green e a systematic review of the state of the art literature. Journal of Cleaner Production. 102, 18-29.
    Garza-Reyes, J. A., Romero, J. T., Govindan, K., Cherrafi, A., & Ramanathan, U. (2018). A PDCA-based approach to Environmental Value Stream Mapping (E-VSM). Journal of Cleaner Production, 180, 335-348.
    Hasle, P. Bojesen, A., Jensen, P. L., Bramming, P.,(2012). “Lean and the working
    Environment : a review of the literature”, International Journal of Operations & Production Management, 32(7): 829–849.
    Howell, G., & Ballard, G. (1998). Implementing lean construction: understanding and action. In Proc. 6 th Ann. Construction Institute. Group for Lean Construction.
    Herron, C., Hicks, C. (2008). The transfer of selected lean manufacturing techniques from Japanese automotive manufacturing into general manufacturing (UK) through change agents. Robotics and Computer-Integrated Manufacturing. 24, 524-531.
    Hines, P., Rich, N. (1997). The seven value stream mapping tools. International Journal of Operations & Production Management. 17, 46-64.
    Hines, P., Holweg, M., Rich, N. (2004). Learning to evolve: a review of contemporary lean thinking.  International Journal of Operations & Production Management. 24, 994-1011.
    Helo, P., Suorsa, M., Hao, Y., & Anussornnitisarn, P. (2014). Toward a cloud-based manufacturing execution system for distributed manufacturing. Computers in Industry, 65(4), 646-656.
    J. Li, D. Blumenfeld. (2006). Implementing an Andon Industrial Engineer: IE, 38 (10), pp. 52-53
    Jayswal, A., Li, X., Zanwar, A., Lou, H. H., & Huang, Y. (2011). A sustainability root cause analysis methodology and its application. Computers & chemical engineering, 35(12), 2786-2798.
    Liker, J. K. (2005). The toyota way. Esensi.
    L. Surhone, M. Timpledon, S. Marseken. (2010).Pareto analysis: Statistics, decision making, Pareto principle, fault tree analysis, failure mode and effects analysis. Pareto distribution Wikipedia Betascript Publishing.
    Muhammad, S. (2015). Quality improvement of fan manufacturing industry by using basic seven tools of quality: A case study. International Journal of Engineering Research and Applications, 5, 30–35.
    Ng, D., Vail, G., Thomas, S., & Schmidt, N. (2010). Applying the Lean principles of the Toyota Production System to reduce wait times in the emergency department. Canadian Journal of Emergency Medicine, 12(1), 50-57.
    Shah, R., & Ward, P. T. (2003). Lean manufacturing: context, practice bundles, and performance. Journal of operations management, 21(2), 129-149.
    S.K. Subramaniam, S.H. Husin, R.S.S. Singh, A.H. Hamidon. (2009). Production monitoring system for monitoring the industrial shop floor performance. International Journal of Systems Applications, Engineering & Development, 3 (1), pp. 28-35
    Sabadka, D., Molnár, V., Fedorko, G., & Jachowicz, T. (2017). Optimization of production processes using the Yamazumi method. Advances in Science and Technology Research Journal, 11.
    Tsasis, P. and Bruce-Barrett, C., (2008). “Organisational change through Lean Thinking”, Health Services Management Research, 21, No (3): 192-198.
    Van Der Wiele, A., Williams, A. R. T., & Dale, B. G. (2000). Total quality management: is it a fad, fashion, or fit? Quality Management Journal, 7(2), 65-79.
    Vlachos, I., & Bogdanovic, A. (2013). Lean thinking in the European hotel industry. Tourism Management, 36, 354-363.
    Vlachos, I (2015) Applying Lean thinking in the Food Supply Chains: A Case Study. Production, Planning and Control, 26 (16). 1351 - 1367.
    Womack, J. P., Womack, J. P., Jones, D. T., & Roos, D. (1990). Machine that changed the world. Simon and Schuster.
    Womack, J. P., & Jones, D. T. (2003). Lean thinking—banish waste and create wealth in your corporation. Journal of the Operational Research Society, 48(11), 1-1148.
    Yaduvanshi, D., Head, M. H., Sharma, A., & Gupta, M. D. (2017). Lean Thinking: An Empirical Study for Performance evaluation in Hospital Operations.
    描述: 碩士
    國立政治大學
    企業管理研究所(MBA學位學程)
    105363123
    資料來源: http://thesis.lib.nccu.edu.tw/record/#G0105363123
    資料類型: thesis
    DOI: 10.6814/THE.NCCU.MBA.016.2019.F08
    顯示於類別:[企業管理研究所（MBA學位學程）] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    312301.pdf2850KbAdobe PDF2524檢視/開啟


    在政大典藏中所有的資料項目都受到原著作權保護.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋