| Reference: | 1.中文部分
大野耐一，吳廣洋譯（2011）。追求超脫規模的經營。中衛發展中心，台北。
王派榮（2002）。豐田生產方式運作之研究─台灣國瑞汽車公司及其協力廠之成功案例。中原大學企業管理研究所碩士論文，桃園縣。
任恒毅、廖秀姬（2008）。精實生產價值溪流程改善方法之實證研究 - 以某汽車空調製造商為例。品質學報，VOL.15，NO.5，台北。
今井正明，許文治譯（1997）。現場改善：日本競爭力的成功之鑰。美商麥格羅希爾出版社，台北。
江瑞坤、大野義男、侯東旭（2007）。豐田的三位一體生產系統。中衛發展中心，台北。
林慧敏（2016）。食品安全衛生管理上之6s e化管理系統建構：以豐田生產系統與戴明循環為應用理論。國立暨南國際大學管理學院經營管理碩士學位學程碩士在職專班碩士論文，南投縣。
邱宏翰、李雋揚（2005）。精實生產於泵浦公司之應用。國立清華大
學工業工程系專題報告。
洪雅涵（2013）。改善傳統VSM導入醫療機構應用之探討。東海大學工業工程與經營資訊學系碩士論文，台中市。
黃楹進（2004）。精實製造。工商時報，台北。
楊義明、盤天培、曹健齡（2005）。精實生産與其它生管系統之介紹。品質月刊，41（11），51-58。
楊凱成（2007）。足下奇蹟-台灣製鞋產業發展史。國立科學工藝博物館，台灣。
2.英文部分
Agpak K. and Gokcen H.(2005). Assembly line balancing: Two resource constrained cases. International Journal of Production Economics 96, 2005, 129-140.
Adnan, A. N., Ain Arbaai, N., & Ismail, A. (2016). Improvement of overall efficiency of production line by using line balancing. ARPN Journal of Engineering and Applied Sciences, 11(12).
Bortolotti, T., and Romano, P. (2012). “Lean first, then automate’: a framework for process improvement in pure service companies. A case study”, Production Planning & Control: The Management of Operations, 23 (7): 513-522.
D.R. Owens. (2006). PDCA at management level. Quality. Program. 39 (4) , p-104.
Díaz, A., Pons, J., & Solís, L. (2012). Improving healthcare services: lean lessons from Aravind. Int. J. Business Excellence, Vol. 5, No. 4 , 413–428.
Edwards, D. K. (1996). Practical guidelines for lean manufacturing equipment. Production and Inventory Management Journal, 37(2).
Feld, W. M. (2000). Lean manufacturing: tools, techniques, and how to use them. CRC press.
Fliedner, G. (2008). Sustainability: a new lean principle. In: Proceedings of the 39th Annual Meeting of the Decision Sciences Institute, Baltimore, Maryland,pp. 3321-3326.
Fliedner, G., Majeske, K. (2010). Sustainability: the new lean frontier. Prod. Inventory Management. J. 46, 6-13
Graban, M. (2016). Lean Hospitals: Thoughts from a Health System C.O.O. on Lean, Purpose, and Safety.
Garza-Reyes, J.A. (2015). Lean and green e a systematic review of the state of the art literature. Journal of Cleaner Production. 102, 18-29.
Garza-Reyes, J. A., Romero, J. T., Govindan, K., Cherrafi, A., & Ramanathan, U. (2018). A PDCA-based approach to Environmental Value Stream Mapping (E-VSM). Journal of Cleaner Production, 180, 335-348.
Hasle, P. Bojesen, A., Jensen, P. L., Bramming, P.,(2012). “Lean and the working
Environment : a review of the literature”, International Journal of Operations & Production Management, 32(7): 829–849.
Howell, G., & Ballard, G. (1998). Implementing lean construction: understanding and action. In Proc. 6 th Ann. Construction Institute. Group for Lean Construction.
Herron, C., Hicks, C. (2008). The transfer of selected lean manufacturing techniques from Japanese automotive manufacturing into general manufacturing (UK) through change agents. Robotics and Computer-Integrated Manufacturing. 24, 524-531.
Hines, P., Rich, N. (1997). The seven value stream mapping tools. International Journal of Operations & Production Management. 17, 46-64.
Hines, P., Holweg, M., Rich, N. (2004). Learning to evolve: a review of contemporary lean thinking. International Journal of Operations & Production Management. 24, 994-1011.
Helo, P., Suorsa, M., Hao, Y., & Anussornnitisarn, P. (2014). Toward a cloud-based manufacturing execution system for distributed manufacturing. Computers in Industry, 65(4), 646-656.
J. Li, D. Blumenfeld. (2006). Implementing an Andon Industrial Engineer: IE, 38 (10), pp. 52-53
Jayswal, A., Li, X., Zanwar, A., Lou, H. H., & Huang, Y. (2011). A sustainability root cause analysis methodology and its application. Computers & chemical engineering, 35(12), 2786-2798.
Liker, J. K. (2005). The toyota way. Esensi.
L. Surhone, M. Timpledon, S. Marseken. (2010).Pareto analysis: Statistics, decision making, Pareto principle, fault tree analysis, failure mode and effects analysis. Pareto distribution Wikipedia Betascript Publishing.
Muhammad, S. (2015). Quality improvement of fan manufacturing industry by using basic seven tools of quality: A case study. International Journal of Engineering Research and Applications, 5, 30–35.
Ng, D., Vail, G., Thomas, S., & Schmidt, N. (2010). Applying the Lean principles of the Toyota Production System to reduce wait times in the emergency department. Canadian Journal of Emergency Medicine, 12(1), 50-57.
Shah, R., & Ward, P. T. (2003). Lean manufacturing: context, practice bundles, and performance. Journal of operations management, 21(2), 129-149.
S.K. Subramaniam, S.H. Husin, R.S.S. Singh, A.H. Hamidon. (2009). Production monitoring system for monitoring the industrial shop floor performance. International Journal of Systems Applications, Engineering & Development, 3 (1), pp. 28-35
Sabadka, D., Molnár, V., Fedorko, G., & Jachowicz, T. (2017). Optimization of production processes using the Yamazumi method. Advances in Science and Technology Research Journal, 11.
Tsasis, P. and Bruce-Barrett, C., (2008). “Organisational change through Lean Thinking”, Health Services Management Research, 21, No (3): 192-198.
Van Der Wiele, A., Williams, A. R. T., & Dale, B. G. (2000). Total quality management: is it a fad, fashion, or fit? Quality Management Journal, 7(2), 65-79.
Vlachos, I., & Bogdanovic, A. (2013). Lean thinking in the European hotel industry. Tourism Management, 36, 354-363.
Vlachos, I (2015) Applying Lean thinking in the Food Supply Chains: A Case Study. Production, Planning and Control, 26 (16). 1351 - 1367.
Womack, J. P., Womack, J. P., Jones, D. T., & Roos, D. (1990). Machine that changed the world. Simon and Schuster.
Womack, J. P., & Jones, D. T. (2003). Lean thinking—banish waste and create wealth in your corporation. Journal of the Operational Research Society, 48(11), 1-1148.
Yaduvanshi, D., Head, M. H., Sharma, A., & Gupta, M. D. (2017). Lean Thinking: An Empirical Study for Performance evaluation in Hospital Operations. |
