政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/78892
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文笔数/总笔数 : 113318/144297 (79%)
造访人次 : 51034726      在线人数 : 904
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    请使用永久网址来引用或连结此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/78892


    题名: Strip adjustment of airborne full-waveform LiDAR data
    作者: Lin, Shihyuan;Liao, Sui Jui
    林士遠;廖思睿
    贡献者: 地政學系
    关键词: 3D surface;Back-scattered;Coregistration;Data sets;Echo data;Flight strips;Full-waveform;LIDAR data;Lidar systems;Point cloud;Pre-processing;Processing chain;Proprietary software;Pulse detection;Quality of data;Surface matching;Wave forms;Data processing;Factor analysis;Remote sensing;Optical radar
    日期: 2011
    上传时间: 2015-10-08 17:37:35 (UTC+8)
    摘要: Airborne full-waveform LiDAR is capable of recording complete waveform of the backscattered laser pulse. Due to the capability, it becomes possible to detect more additional objects on each laser travel path compared with traditional LiDAR systems, and therefore has been gradually introduced in applications over forest or vegetation areas. In order to extract information of interest from the scanned point cloud, data processing including pre-processing (such as pulse detection), co-registration, segmentation, classification, etc. are performed in order. From the processing chain, it is realized that quality of data co-registration is one of the key factors affects reliability of processing and analyses performed afterwards. Therefore this paper focuses on the issue may occur at this stage and proposes a method to improve the performance of data co-registration. Two sets of point cloud collected from adjacent flight strips using Riegl Q680i airborne full-waveform LiDAR were employed in this paper. The scanned data are classified as single, first, last and other echoes in this system. For examining performance of strip adjustment, point clouds of single and last echoes, which were of better potential for representing the terrain, were extracted from the two strips respectively. After the pre-processing and co-registration performed in the proprietary software RiPROCESS, it was found that mis-alignment between the two strips existed when single or last echoes datasets were employed. To address the issue, the technique of 3D surface matching was applied. Moreover, for achieving an ideal co-registration, performance of surface matching using different types of echo data was assessed. The improvement achieved and feasibility of the method are analyzed in the paper.
    關聯: 32nd Asian Conference on Remote Sensing 2011, ACRS 2011
    数据类型: conference
    显示于类别:[地政學系] 會議論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML2966检视/开启


    在政大典藏中所有的数据项都受到原著作权保护.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈