政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/65512
English  |  正體中文  |  简体中文  |  Post-Print筆數 : 27 |  全文筆數/總筆數 : 114205/145239 (79%)
造訪人次 : 52701023      線上人數 : 449
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/65512


    題名: A Further Evaluation of Orthometric Correction Using Measured Gravity for Each Set-up between Two Benchmarks
    作者: 甯方璽;高書屏
    Ning, Fang-Shii;Kao, Szu-Pyng
    貢獻者: 地政系
    關鍵詞: 正高改正;實測重力值
    orthometric correction;measured gravity
    日期: 2008.11
    上傳時間: 2014-04-18 17:10:42 (UTC+8)
    摘要: 以往的正高改正研究所使用的重力數據皆僅使用在水準點上觀測之重力值, 如此將忽略在水準點間之地形及沿著施測路線上其他的影響因素. 因此, 本研究於兩水準點間進行一等水準測量並同時於標尺擺設處實施重力測量, 利用實測重力值進行正高改正之研究, 針對計算出測線之正高改正結果進行分析. 本文選擇台灣地區水準網中代表不同地形的 3 段水準測線進行一等水準測量及重力測量, 以計算不同地形之正高改正進行研究. 本研究採用質量密度一致進行計算以比較利用兩水準點上之重力數據計算之正高改正與兩水準點間一等水準測量時各標尺擺設處實施重力測量 累積所計算之正高改正, 其結果顯示正高改正有0.1mm~0.5mm 之間的差異. 最後根據本研究所獲得的結果顯示, 於高精度水準測量進行正高改正時需以沿水準路線各標尺擺設位置之實測重力以進行計算.
    Previous research in orthometric correction used gravity data measured on benchmarks only. It neglects the effect of the terrain and other factors along the leveling route between benchmarks. The objective of this study is to further show numerical experiments and results of field test for computing orthometric correction base on measured gravity at each set-up of the staff along the leveling route between two benchmarks. In this paper three sets of the first-order leveling and gravity data within the first-order leveling network of Taiwan, which represent the different terrains from lower altitude to higher altitude, were used in the experiment for the computation of the orthometric correction. Then a comparison is made between the orthometric height corrections by using gravity data at benchmarks only, and those using gravity data observed at each set-up of the staff between two benchmarks. The results of field tests show that, a difference of 0.1mm to 0.5 mm was observed between the orthometric corrections with the constant mass-density computed at benchmarks only and each set-up. From the obtained results of this study, it is concluded that, at the highest level of accuracy for leveling surveys, the orthometric corrections should be taken into account the measured gravity at each set-up along the leveling route between benchmarks.
    關聯: 中正嶺學報, 37(1), 65-70
    資料類型: article
    顯示於類別:[地政學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    65-70.pdf3302KbAdobe PDF21036檢視/開啟


    在政大典藏中所有的資料項目都受到原著作權保護.


    社群 sharing

    著作權政策宣告 Copyright Announcement
    1.本網站之數位內容為國立政治大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,惟仍請適度,合理使用本網站之內容,以尊重著作權人之權益。商業上之利用,則請先取得著作權人之授權。
    The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

    2.本網站之製作,已盡力防止侵害著作權人之權益,如仍發現本網站之數位內容有侵害著作權人權益情事者,請權利人通知本網站維護人員(nccur@nccu.edu.tw),維護人員將立即採取移除該數位著作等補救措施。
    NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋