政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/141381

政大機構典藏-National Chengchi University Institutional Repository(NCCUR):Item 140.119/141381

English | 正體中文 | 简体中文 | Post-Print筆數 : 27 | 全文笔数/总笔数 : 113325/144300 (79%)
造访人次 : 51155796 在线人数 : 921

RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.

搜寻范围

查询小技巧：

您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果

若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据

进阶搜寻

主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于政大典藏 ‧ 管理

到手机版

政大機構典藏 > 商學院 > 企業管理研究所（MBA學位學程） > 學位論文 > Item 140.119/141381

请使用永久网址来引用或连结此文件: https://nccur.lib.nccu.edu.tw/handle/140.119/141381

题名:	基於夏普利值的公平性量化模型 —以二階段製程系統為例 Quantitative models for fairness issues based on Shapley value – Taking a two-process manufacturing system as an example
作者:	蔡德脩 Tsai, Te-Hsiu
贡献者:	洪叔民 Horng, Shwu-Min 蔡德脩 Tsai, Te-Hsiu
关键词:	夏普利值激勵合約供應鏈外包量化公平性 Shapley value Incentive contract Supply chain Outsourcing Quantitative Fairness
日期:	2022
上传时间:	2022-08-01 18:57:07 (UTC+8)
摘要:	利益分配一直都是供應鏈通路協作中的重要議題，這篇文獻裡我們將探討(1)如何合理的分配合作利益以及(2)哪種情形的利益分配會導致合作破裂。我們透過夏普利值來計算供應鏈中參與者的邊際貢獻，然後計算出每個人合理的應得利潤，此外我們也利用夏普利值針對Schmidt (1999)文獻中的不公平厭惡(Inequality Aversion)的量化公式進行修改，得出能夠合理反映一個供應鏈中，具有不平等條件的各個合作參與者的合作效用(Utility)的模型，並用此模型來判斷一次合作是否會成立或破滅。同時我們也以一個二階段製程系統為例進行數值分析來使我們的分析更具體。因此本研究參考了Tarakci, Tang (2006)研究中的供應鏈模型，透過假定不同參數來模擬不同的供應鏈合作情境，並用我們的模型來計算合理的利益分配以及判斷合作的可行性。例如在該系統中當一個製造商面對一個掌管核心高階技術的維修承包商，以及另一個可替代性較高的維修承包商時，利潤應該如何分配才能促成有效率的通路合作;抑或是當一個製造商面對兩個具有相似技術的承包商時應該如何合理的分配利益。最後，我們也會探討在該論文中傳統的利潤分配方法在加入的公平性的考量後的可行性，以此證明這些方法如激勵合約(Incentive Contract)的優點與缺陷。 Resource allocation is always an important issue in channel coordination of supply chain. In this thesis, we will discuss (i) how to fairly distribute profit and (ii) based on fairness, in what situations the coordination will break. We will use Shapley value to calculate the deserved profit of each participant in a supply chain. Besides, we will modify the formula of inequality aversion in the Fehr und Schmidt (1999) thesis as a model which can reasonably reflect the participants’ utility with different conditions in a supply chain, and use it to judge if a coordination will break or not. At the same time, we take two-process manufacturing system as example and analyze the numerical results in different situations of system through our model. We refer the supply chain models in Tarakci and Tang (2006), and simulate different coordination scenarios by adjusting different parameters of our models. By using our quantitative model, we can fairly distribute profit in these scenarios and judge the possibility of coordination in systems with different conditions. For example, when a manufacturer faces a maintenance contractor who is in charge of core high-level technology and a maintenance contractor which is more replaceable, how should profits be distributed to attain efficient channel cooperation and in what situations the coordination will be broken? How about a manufacturer with two contractors will similar techniques? At the end of our thesis, we will also discuss the traditional methods (like incentive contract) of profit allocation which don’t consider fairness factor to show the pros and cons of these methods.
參考文獻:	Alzoubia, H., Alshuridehb, M., Kurdic, B. A., & Inairata, M. (2020). Do Perceived Service Value, Quality, Price Fairness and Service Recovery Shape Customer Satisfaction and Delight? A Practical Study in the Service Telecommunication Context. Uncertain Supply Chain Management, 8(3), 579–588. Campbell, C. M., & Kamlani, K. S. (1997). The Reasons for Wage Rigidity: Evidence From a Survey of Firms. The Reasons for Wage Rigidity: Evidence From a Survey of Firms, 112(3), 759–789. Cruijssen, F. (2010). Supplier-Initiated Outsourcing: A Methodology to Exploit Synergy in Transportation. European Journal of Operational Research, 207(2), 763–774. Cui, T. H. (2007). Fairness and Channel Coordination. Management Science, 53(8), 1303–1314 Fehr, E., & Schmidt, K. M. (1999). A Theory of Fairness, Competition, and Cooperation. The Quarterly Journal of Economics, 114(3), 817–868. Fehr, E., Klein, A., & Schmidt, K. M. (2007). Fairness and Contract Design. Econometrica, 75(1), 121–154. Flisberg, P., Frisk, M., Guajardo, M., & Rönnqvist, M. (2015). Reallocation of Logistics Costs in a Cooperative Network of Sawmills. Computational Methods in Applied Sciences, 45, 171–183. Güth, W., Schmittberger, R., & Schwarze, B. (1982). An Experimental Analysis of Ultimatum Bargaining. Journal of Economic Behavior & Organization, 3(4), 367–388. Herreiner, D. K., & Puppe , C. (2010). Inequality Aversion and Efficiency with Ordinal and Cardinal Social Preferences—An Experimental Study. Journal of Economic Behavior & Organization, 76(2), 238–253. Kahneman, D., Knetsch, J. l., & Thaler, R. (1986). Fairness as a Constraint on Profit Seeking: Entitlements in the Market. The American Economic Review, 76(4), 728– 741. Katok, E. (2013). Fairness in Supply Chain Contracts: A Laboratory Study. Journal of Operations Management, 31(3), 129–137. Layarda, R., Mayrazb, G. & Nickellc, S. (2008) The Marginal Utility of Income. Journal of Public Economics, 92(8), 1846-1857 Ôzyurt, S. (2015). Searching for a Bargain: Power of Strategic Commitment. American Economic Journal: Microeconomics, 7(1), 320–353. Petróczy, D. G., & Csató, L. (2021). Revenue Allocation in Formula One: A Pairwise Comparison Approach. International Journal of General Systems, 50(3), 243–261. Prasnikar, V., & Rotht, A. E. (1992). Considerations of Fairness and Strategy: Experimental Data From Sequential Games. The Quarterly Journal of Economics, 107(3), 865–888. Rey-biel, P. (2008). Inequity Aversion and Team Incentives. The Scandinavian Journal of Economics, 110(2), 297–320. Robinson, L. W. (1993). A Comment on Gerchak and Gupta’s“On Apportioning Costs to Customers in Centralized Continuous Review Inventory Systems.” Journal of Operations Management, 11(1), 99–102. Roth, A. E. (1991). Bargaining and Market Behavior in Jerusalem, Ljubljana, Pittsburgh, and Tokyo: An Experimental Study. The American Economic Review, 81(5), 1068– 1095. Sošić , G. (2006). Transshipment Od Inventories Among Retailers: Myopics vs Farsighted Stability. Management Science, 52(10), 1493–1508. Tarakci, H., & Tang, K. (2006). Maintenance Outsourcing of a Multi-Process Manufacturing System with Multiple Contractors. IIE Transactions, 38(8), 77–78. Tarakci, H., & Tang, K. (2006). Incentive Maintenance Outsourcing Contracts for Channel Coordination and Improvement. IIE Transactions, 38(8), 671–684. Zhenga, X. X., Lib, D. F., Liuc, Z., Jiad, F., & Sheue, J. B. (2019). Coordinating a Closed-Loop Supply Chain with Fairness Concerns through Variable-Weighted Shapley Values. Transportation Research Part E, 126, 227–253. Ziano, I., lembregts, C., & Pandelaere, M. (2022). People Weigh Salaries More than Ratios in Judgments of Income Inequality, Fairness, and Demands for Redistribution. Journal of Economic Psychology, 89.
描述:	碩士國立政治大學企業管理研究所(MBA學位學程) 108363071
資料來源:	http://thesis.lib.nccu.edu.tw/record/#G0108363071
数据类型:	thesis
DOI:	10.6814/NCCU202200660
显示于类别:	[企業管理研究所（MBA學位學程）] 學位論文

文件中的档案:

档案	描述	大小	格式	浏览次数
307101.pdf		1644Kb	Adobe PDF2	75	检视/开启

在政大典藏中所有的数据项都受到原著作权保护.

社群 sharing

著作權政策宣告 Copyright Announcement

1.本網站之數位內容為國立政治大學所收錄之機構典藏，無償提供學術研究與公眾教育等公益性使用，惟仍請適度，合理使用本網站之內容，以尊重著作權人之權益。商業上之利用，則請先取得著作權人之授權。
The digital content of this website is part of National Chengchi University Institutional Repository. It provides free access to academic research and public education for non-commercial use. Please utilize it in a proper and reasonable manner and respect the rights of copyright owners. For commercial use, please obtain authorization from the copyright owner in advance.

2.本網站之製作，已盡力防止侵害著作權人之權益，如仍發現本網站之數位內容有侵害著作權人權益情事者，請權利人通知本網站維護人員(nccur@nccu.edu.tw)，維護人員將立即採取移除該數位著作等補救措施。
NCCU Institutional Repository is made to protect the interests of copyright owners. If you believe that any material on the website infringes copyright, please contact our staff(nccur@nccu.edu.tw). We will remove the work from the repository and investigate your claim.

DSpace Software Copyright © 2002-2004 MIT & Hewlett-Packard / Enhanced by NTU Library IR team Copyright © - 回馈