| Reference: | [1] Z. Wang et al, "Realization of a wearable miniaturized thermoelectric generator for human body applications," Sensors and Actuators A, vol. 156, pp. 95–102, November 2009.
[2] S.B. Schaevitz et al, "A Combustion-Based MEMS Thermoelectric Power
Generator," Transducers ’01 Eurosensors XV , Heidelberg, 2001.
[3] 國立嘉義大學 ,“電子束蒸鍍系統”國立嘉義大學貴重儀器中心 , 2008. [線上].
[4] P.H. Holloway, "Gold/chromium metallizations for electronic devices," Gold Bulletin, vol. 12, no. 3, pp. 99–106, September 1979.
[5] T.O. Akinyemi and O.E. Simolowo, "A Mobile Tropical Cooling System Design Using a Thermoelectric Module," TRANSACTIONS ON MACHINE LEARNING AND ARTIFICIAL INTELLIGENCE, vol. 5, no. 3, pp. 1-12, June 2017.
[6] 黃振東、徐振庭 ,“熱電材料”科學發展 , 編號 486, pp. 48-53, June 2013.
[7] 李世光 ,“經濟部施政重點”2016.
[8] 凌力爾特公司 ,“採用超低電壓轉換器改善從熱電能源的能量收集”. 2013.
[9] Y.H. Choi et al, “An electrodynamic preconcentrator integrated thermoelectric
biosensor chip for continuous monitoring of biochemical process,” J. Micromech. Microeng., pp. 1-13, March 2012.
[10] K. Technologies, 智慧型手錶功耗分析全記錄 , Keysight Technologies, 2015.
[11] D. Champier et al, "Study of a TE (thermoelectric) generator incorporated in a
multifunction wood stove," Energy, vol. 36, pp. 1518-1526, January 2011.
[12] L.E. Bell, "Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems," Sciece, vol. 321, pp. 1457-1461, September 2008.
[13] 朱旭山 ,“熱電材料與元件之原理與應用”電子與材料雜誌 , 編號 22, pp. 78-89, 2004.
[14] M. Enrique, “Thermoelectric Materials: Advances and Applications,” Research
Gate, May 2015.
[15] J.C. Hsiao et al, "Anisotropic thermal conductivity of sputtered Bi0.5Sb1.5Te3
films after current-assisted thermal treatment," Thin Solid Films, no. 645, pp. 93-
96, January 2018.
[16] A.R.M. Siddique et al, "A review of the state of the science on wearable
thermoelectric power generators(TEGs) and their existing challenges," Renewable and Sustainable Energy Reviews, no. 73, pp. 730-744, February 2017.
[17] R. Bjørk et al, "Analysis of the internal heat losses in a thermoelectric generator,"
International Journal of Thermal Sciences, no. 85, pp. 12-20, July 2014.
[18] S.B. Schaevitz, “A MEMS Thermoelectric Generator,” Thesis, September 2000.
[19] G. J. Snyder and E. S. Toberer, "Complex thermoelectric materials," Nature Materials, vol. 7, pp. 105-114, February 2008.
[20] S. Liu et al, "Micro-thermoelectric generators based on through glass pillars with high output voltage enabled by large temperature difference," Applied Energy, vol. 225, pp. 600-610, May 2018.
[21] G. J. Snyder et al, "Thermoelectric microdevice fabricated by a MEMS-like
electrochemical process," Nature Materials, vol. 2, pp. 528-531, August 2003.
[22] 蔡信行、孫光中 , 奈米科技導論-基本原理及應用 , 台北: 新文京開發出版股份有限公司 , 2004.
[23] A. F. Conde et al, "Study of the electronic transport in the semiconducting
Bi0.5Sb1.5Te3 and Bi1.5Sb0.5Te3 alloys," Journal of Materials Science: Materials in Electronics, vol. 29, no. 18, pp. 15658-15663, September 2018.
[24] X. Yan et al, "Experimental Studies on Anisotropic Thermoelectric Properties and Structures of n-Type Bi2Te2.7Se0.3," Nano Lett., vol. 10, pp. 3373-3378, July 2010.
[25] I. Chowdhury et al, "On-chip cooling by superlattice-based thin-film
thermoelectrics," Nature NanoTechnology, vol. 4, pp. 235-238, April 2009.
[26] J.P. Carmo et al, "Thermoelectric Microconverter for Energy Harvesting Systems," IEEE Transactions on Industrial Electronics, vol. 57, no. 3, pp. 861-867, April 2010.
[27] W. Zhang et al, "A High Power Density Micro-Thermoelectric Generator Fabricated by an Integrated Bottom-Up Approach," Journal of MicroelectroMechanical Systems, vol. 25, no. 4, pp. 744-749, August 2016.
[28] L.M. Goncalves et al, "Thermal co-evaporation of Sb2Te3 thin-films optimized for thermoelectric applications," Thin Solid Films, vol. 519, pp. 4152-4157, March 2011.
[29] A. Soni et al, "Interface Driven Energy Filtering of Thermoelectric Power in Spark Plasma Sintered Bi2Te2.7Se0.3 Nanoplatelet Composites," Nano Lett., vol. 12, p. 4305−4310, July 2012.
[30] M. Mizoshiri et al, "Lift-off patterning of thermoelectric thick films deposited by a thermally assisted sputtering method," Appl. Phys. Express, vol. 7, pp. 1-4, April 2014.
[31] C. Schumacher et al, "Optimizations of Pulsed Plated p and n-type Bi2Te3-Based Ternary Compounds by Annealing in Different Ambient Atmospheres," Adv. Energy Mater., vol. 3, pp. 95-104, August 2012.
[32] H.J. Lin et al, "Effect of Annealing Temperature on the Thermoelectric Properties of the Bi0.5Sb1.5Te3 Thin Films Prepared by Radio-Frequency Sputtering," Metallurgical and Materials Transactions A, vol. 44, no 5, pp. 2339-2345, January 2013.
[33] M. Mizoshiri et al, "The effect of Cr buffer layer thickness on voltage generation of thin-film thermoelectric modules," J. Micromech. Microeng., vol. 23, no. 11, pp. 1-9, October 2013.
[34] Z.B. Tang et al, "A research on thermoelectric generator`s electrical performance
under temperature mismatch conditions for automotive waste heat recovery
system," Case Studies in Thermal Engineering, vol. 5, p. 143–150, March 2015.
[35] W.S. Liu et al, "Understanding of the contact of nanostructured thermoelectric n
type Bi2Te2.7Se0.3 legs for power generation applications," J. Mater. Chem. A, vol. 1, p. 13093–13100, September 2013.
[36] R. Ditchfield et al, "Semiconductor surface diffusion: Effects of low-energy ion
bombardment," Physical Review B, vol. 63, pp. 1253171-9, March 2001.
[37] R. Ditchfield and E.G. Seebauer, "Direct Measurement of Ion-Influenced Surface
Diffusion," Physical Review Letters, vol. 82, no. 6, pp. 1185-1188, February 1999.
[38] T.C. Harman et al, "Quantum Dot Superlattice Thermoelectric Materials and
Devices," Science, vol. 297, pp. 2229-2232, Septempber 2002.
[39] J.P. Carmo et al, "Thermoelectric generator and solid-state battery for stand-alone microsystems," J. Micromech. Microeng, vol. 20, pp. 1-8, July 2010.
[40] H. Böttner et al, "New Thermoelectric Components Using Microsystem Technologies," Journal of Microelectrictromechanical System, vol. 13, no. 3, pp. 414-420, June 2004.
[41] I. Savani et al, "Harnessing thermoelectric power from transient heat sources: Waste heat recovery from silicon production," Energy Conversion and Management, vol. 138, p. 171–182, February 2017. |
